Airlink101 A3-Port USB Print Server APSUSB2 User Manual

Quick Installation GuideModel # APSUSB2Ver. 2A3-Port USB Print Server

Section 4Step 3 Click Next.Step 4 Select a printer that is connected to the print server and click Next.Note: If you have more than one printer connec

Step 5 Double-click on the Print Server Name, select the Printer Port that the printer is connected to,and click Next.Step 6 Click Reboot (for Windows

Section 6Performing Operating System Print TestThe final step in setting up the Print Server is to perform an operating system printtest. Please note

Section 7Technical SupportE-mail: [email protected] Free: 1-888-746-3238Web Site: www.airlink101.comFor more information on how to use the We

Copyright © 2004 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words andlogo

Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the otherend of the cable to a router.Step 2 Make sure al

Section 2Installing PS UtilityStep 1 Insert the provided CD and wait for the setup menu to appear.Step 2 Click on PS Utility.Step 3 Click Next.Note: I

Step 4 Click Next.Step 5 Click Yes.Step 6 Click Finish.

Section 3Configuring Network SettingBefore configuring the Print Server’s network setting, please take note of your computer’sTCP/IP setting.Step 1 Cl

For the Subnet Mask and Default Gateway fields, enter the same number as the TCP/IP setting of yourcomputer.Step 6 In the IP Address field, enter a va

Verifying Network ConnectionSection 4Step 1 Run the PS Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00.Step 2 Make sure the pr

Step 5 Click on the Tools link and select the port that a printer is connected to and click the Test button.The Print Server will perform a low-level

Section 5Running PS WizardWarning: Make sure you have installed the printer driver locally on every computer in your networkbefore running the PS Wiza